Projects > Coca-Cola 3D Bottles

3D Bottle Technical Information

Molds available for additional casts, upon authorization by Coca-Cola: On the following descriptions the word 'relief' means the depth of the three or how far it sticks out from the surface it is mounted to if it is a half round design. All of the bottles can be finished into any outer design.

15' half round contour bottle - Can be made into a full round, 15' tall, 4'-10"wide and 28" relief. Weight is approximately 150+ lbs. Depending on the hardware necessary.

25' half round contour bottles - Can be made into a full round, 25' tall, 8' wide and 4' relief. Weight is 700+ lbs depending on the hardware necessary.

14' half round 'bolt' bottle design - can be made into a full round bottle, 14' tall, 4'-3" wide and 25" relief. Weight is approximately 125+ lbs depending on the hardware necessary.

Ice - 5' long, 3' wide and 30" tall. These units are for the 25' and 30' bottles. We can make individual pieces for the 15' bottles if needed.

In addition to these molds, if your advertising calls for something additional (like a golf ball ?) browse through our other molds.

Back to Clients > Coca-Cola Company and Coca-Cola Bottlers

Projects >

• Spectacular Illuminated Projects
• Three Dimensional designs
• Hand Painted Wall Murals
• Coca-Cola productions and technical information
• Coca-Cola 3D bottles
• Hand Painted Coca-Cola Historic Wall Murals

© COPYRIGHT 2001-2003 ART PRODUCTIONS, INC. - ALL RIGHTS RESERVED
No portion of this site may be used in any form without the express written consent of ART PRODUCTIONS, INC.